Machine
Vision system
Edge tracking
Automatic realignment
Defect detection
Our vision system is developed in-house from start to finish. In fact, the camera and PLC have been programmed, enabling us, for example, to adapt different degrees of detection to different materials.
This system allows us to achieve unprecedented precision in process management and line automation.
Our camera enables border tracking, automatic realignment, defects detection and labels detection.
Several functions are available to suit your needs.
Available on all our machines!
Operating modes
Edge tracking
Our camera is powerful enough to detect a border through a liner (composites)
Automatic realignment
Instant re-alignment by moving complete unwinding module
Irregular edges
Material edge detection is performed by point averaging, which is very effective on materials with irregular edges (textiles, composites, foams).
Change of references
Thanks to an intuitive system, the origin / reference can be easily modified during the process.
Defect detection
Defect areas can also be represented in the form of a heat map, enabling a very detailed analysis of the material.
Defect detection
The fault zone is analyzed by the camera, and this information can be relayed to eliminate the fault zone. It is possible to produce a material map showing the location of defects, accompanied by camera images of the defective areas.
Labels detection
The PLC designed by CNM Process is capable of detecting different colors and associating directives with each of them (stop, cut, feedback, etc.).
